Fitting Adjustable Bed Motors Guide

Step 1

Plug in the hand control.
Step 2

Loop the cable through the bridge, hook it over the anchor.
Step 3

Pull back on the cable. Slide the two motor covers off.
Step 4

Lean the adjustable bed mechanism against a wall.
Step 5

You will find an illustration of the head end on the motor.
Step 6

The head end of the mechanism can be identified by the short neck section.
Step 7

Position the twin motor over the hooks of the drive bars.
Step 8

Push hard. You will hear a click when it locates into position.
Step 9

Slide the motor covers back on. They will not fit if the motors are not pushed back on hard enough.
To Download a Copy of the ‘Fitting Adjustable Bed Motors’ Guide Please Click Here.